Comments on: Clear Cube http://www.command-tab.com/2005/11/03/clear-cube/ Technology and Mac geekery. One part exuberance, two parts obsession. Fri, 05 Dec 2008 09:35:54 +0000 http://wordpress.org/?v=2.6.5 By: Jeremy Kemp http://www.command-tab.com/2005/11/03/clear-cube/#comment-2355 Jeremy Kemp Mon, 07 Nov 2005 19:56:13 +0000 http://www.command-tab.com/?p=204#comment-2355 I just had to remove the shielding. Ridiculously easy instructions: 1. Pop the core and set it aside. 2. Remove two phillips and four torx 10 screws from the shield assembly and remove. 3. Drill out four rivets holding the top to the sides. 4. Return the top plate (with latch grips) to the enclosure. 5. Replace the core. I noticed that if you move the cube much, the power switch can become "depressed" and switch the computer off. I disconnected it and used the power button on my ADC LCD instead. I just had to remove the shielding. Ridiculously easy instructions:
1. Pop the core and set it aside.
2. Remove two phillips and four torx 10 screws from the shield assembly and remove.
3. Drill out four rivets holding the top to the sides.
4. Return the top plate (with latch grips) to the enclosure.
5. Replace the core.

I noticed that if you move the cube much, the power switch can become “depressed” and switch the computer off. I disconnected it and used the power button on my ADC LCD instead.

]]>